2008 Yamaha Motorsports RS Vector LTX GT Owners Manual - Page 46
2008 Yamaha Motorsports RS Vector LTX GT Manual
Page 46 highlights
Periodic maintenance ESU11740 Tool kit The owner's tool kit has the tools which are sufficient for most periodic maintenance and minor repairs. A torque wrench is also necessary to properly tighten nuts and bolts. 1. Fastener 2. Shroud 1. Tool kit ECS00360 To install the shroud Hook the end of the shroud onto the shroud stay, slowly lower it to the original position, and then tighten the fasteners. CAUTION: Before starting the engine, make sure that the tool kit is properly seated in its holder and is securely fastened. NOTE: If you do not have a torque wrench available during a service operation requiring one, take your snowmobile to a Yamaha dealer to check the torque settings and adjust them if necessary. ESU12891 1. Shroud stay Left and right side covers To remove a side cover 1. Remove the shroud. (See the above procedure.) 2. Loosen the fasteners, and then remove the side cover. Removing and installing the shroud and covers Shroud To remove the shroud Loosen the fasteners, slowly raise the shroud, and then unhook the shroud from the shroud stay. 40