2008 Yamaha Motorsports Midnight Warrior Owners Manual - Page 29
2008 Yamaha Motorsports Midnight Warrior Manual
Page 29 highlights
INSTRUMENT AND CONTROL FUNCTIONS preload. With each complete turn of the adjusting nut, distance A is changed by 1.5 mm (0.06 in). ECA11240 CAUTION: Always tighten the locknut against the adjusting nut, and then tighten the locknut to the specified torque. Rebound damping force Rebound damping setting: Minimum (soft) 20 click(s) in direction (b)* Standard 10 click(s) in direction (b)* Maximum (hard) 3 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a)* 3 1. Distance A Spring preload: Minimum (hard): Distance A = 163 mm (6.42 in) Standard: Distance A = 172 mm (6.77 in) Maximum (soft): Distance A = 174 mm (6.85 in) 1. Rebound damping force adjusting knob 3. Tighten the locknut to the specified torque. Tightening torque: Locknut: 50 Nm (5.0 m·kgf, 36 ft·lbf) To increase the rebound damping force and thereby harden the rebound damping, turn the adjusting knob in direction (a). To decrease the rebound damping force and thereby soften the rebound damping, turn the adjusting knob in direction (b). NOTE: Although the total number of clicks of the damping force adjusting mechanism may not exactly match the above specifications due to small differences in production, the actual number of clicks always represents the entire adjusting range. To obtain a precise adjustment, it would be advisable to check the number of clicks of the damping force adjusting mechanism and to modify the specifications as necessary. EWA10220 WARNING This shock absorber contains highly pressurized nitrogen gas. For proper handling, read and understand the following information before handling the shock absorber. The 3-12