2008 Yamaha Motorsports Grizzly 700 FI Auto. 4x4 EPS Ducks Unlimited Edition O - Page 133

NOTE: The sponge material should be wet but not dripping. 9. Install the mesh and the sponge material into the air filter case. 10. Insert the projections on the air filter case cover into the holders on the air filter case, and then install the air filter case cover by hooking the holders onto the cover. eas. Each time the air filter element maintenance is performed, check the air inlet of the air filter case for obstructions. Check the air filter case rubber joint to the throttle body and the rubber joint manifold fittings for an air-tight seal. Tighten all fittings securely to avoid the possibility of unfiltered air entering the engine. ECB00760 CAUTION: • Make sure that the air filter element is properly seated in the air filter case. • Never operate the engine with the air filter element removed. This will allow unfiltered air to enter the engine, causing rapid engine wear and possible engine damage. Additionally, operation without the air filter element will affect the fuel injection system with subsequent poor performance and possible engine overheating. EBU27420 11. Install the panel. NOTE: The air filter element should be cleaned every 20- 40 hours. It should be cleaned and lubricated more often if the ATV is operated in extremely dusty ar8-40 Cleaning the spark arrester Select a well-ventilated area free of combustible materials and make sure the exhaust and muffler are cool. 1. Remove the bolts.