2008 Yamaha Motorsports Grizzly 700 4x4 EPS SE Owners Manual - Page 154
2008 Yamaha Motorsports Grizzly 700 4x4 EPS SE Manual
Page 154 highlights
5. Place a new headlight bulb into position, and then secure it with the bulb holder. ECB00670 CAUTION: Make sure the headlight bulb holder cover is securely fitted over the bulb holder and seated properly. 9. Adjust the headlight beam if necessary. EBU25550 Adjusting a headlight beam ECB00690 CAUTION: It is advisable to have a Yamaha dealer make this adjustment. 1. Do not touch the glass part of the bulb. ECB00650 CAUTION: Do not touch the glass part of the headlight bulb to keep it free from oil, otherwise the transparency of the glass, the luminosity of the bulb, and the bulb life will be adversely affected. Thoroughly clean off any dirt and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. 6. Connect the headlight coupler. 7. Install the headlight bulb cover. 8. Install the cover at the rear of the headlight. 8-61 To raise a headlight beam, turn the adjusting screw in direction (a). To lower a headlight beam, turn the adjusting screw in direction (b).