2008 Yamaha Motorsports Apex M-TX SE Owners Manual - Page 76

2008 Yamaha Motorsports Apex M-TX SE Manual

Page 76 highlights

Periodic maintenance 1. Screw 1 . Bulb holder 6. 7. Remove the bulb. Install the new bulb, and then hook the bulb holder onto the headlight unit. Bulb type: Halogen bulb ECS00620 CAUTION: 1. Screw 2. Headlight access panel 3. 4. Disconnect the headlight coupler. Remove the bulb holder cover. Keep oil and your hands away from the glass part of the bulb or its life and illumination will be affected. If the glass is oil stained, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. 1 . Headlight coupler 2. Bulb holder cover 1 . Do not touch the glass part of the bulb. 5. Unhook the bulb holder by pushing it in, then clockwise. 8. 9. Install the bulb holder cover, and then connect the headlight coupler. Install the headlight access panel and the top cover. 70

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98

Periodic maintenance
1.
Screw
1.
Screw
2.
Headlight access panel
3.
Disconnect the headlight coupler.
4.
Remove the bulb holder cover.
1.
Headlight coupler
2.
Bulb holder cover
5.
Unhook the bulb holder by pushing it in,
then clockwise.
1.
Bulb holder
6.
Remove the bulb.
7.
Install the new bulb, and then hook the
bulb holder onto the headlight unit.
Bulb type:
Halogen bulb
ECS00620
CAUTION:
Keep oil and your hands away from the
glass part of the bulb or its life and illumi-
nation will be affected.
If the glass is oil stained, thoroughly clean
it with a cloth moistened with alcohol or
lacquer thinner.
1.
Do not touch the glass part of the bulb.
8.
Install the bulb holder cover, and then
connect the headlight coupler.
9.
Install the headlight access panel and the
top cover.
70