2007 Yamaha Motorsports V Star 1300 Tourer Owners Manual - Page 71

2007 Yamaha Motorsports V Star 1300 Tourer Manual

Page 71 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR EAU42470 Replacing the headlight bulb This model is equipped with a quartz bulb headlight. If the headlight bulb burns out, replace it as follows. 1. Remove the turn signal/position light bracket cover by removing the bolts. 1. Bolt 1. Headlight bulb holder 2. Headlight bulb EWA10790 3. Disconnect the headlight coupler, and then remove the bulb cover. WARNING Headlight bulbs get very hot. Therefore, keep flammable products away from a lit headlight bulb, and do not touch the bulb until it has cooled down. 5. Place a new headlight bulb into position, and then secure it with the bulb holder. 6 1. Turn signal/position light bracket cover 2. Bolt 2. Remove the headlight unit by removing the bolts on each side. 1. Headlight bulb cover 2. Headlight coupler ECA10660 CAUTION: Do not touch the glass part of the headlight bulb to keep it free from oil, otherwise the transparency of the glass, the luminosity of the bulb, 4. Unhook the headlight bulb holder, and then remove the defective bulb. 6-32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97

PERIODIC MAINTENANCE AND MINOR REPAIR
6-32
6
EAU42470
Replacing the headlight bulb
This model is equipped with a quartz
bulb headlight. If the headlight bulb
burns out, replace it as follows.
1. Remove the turn signal/position
light bracket cover by removing the
bolts.
2. Remove the headlight unit by re-
moving the bolts on each side.
3. Disconnect the headlight coupler,
and then remove the bulb cover.
4.
Unhook the headlight bulb holder,
and then remove the defective
bulb.
WARNING
EWA10790
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
5.
Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
CAUTION:
ECA10660
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
1.
Turn signal/position light bracket cover
2. Bolt
1. Bolt
1.
Headlight bulb cover
2.
Headlight coupler
1.
Headlight bulb holder
2.
Headlight bulb