2007 Yamaha Motorsports V Star 1100 Silverado Owners Manual - Page 54
2007 Yamaha Motorsports V Star 1100 Silverado Manual
Page 54 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR 3. Remove the spark plug as shown, with the spark plug wrench included in the owner's tool kit. diagnose such problems yourself. Instead, have a Yamaha dealer check the vehicle. 3. Check each spark plug for electrode erosion and excessive carbon or other deposits, and replace it if necessary. Specified spark plug: NGK/BPR7ES DENSO/W22EPR-U 1. Spark plug wrench Spark plug gap: 0.7-0.8 mm (0.028-0.031 in) 2. Clean the surface of the spark plug gasket and its mating surface, and then wipe off any grime from the spark plug threads. 3. Install the spark plug with the spark plug wrench, and then tighten it to the specified torque. Tightening torque: Spark plug: 20 Nm (2.0 m·kgf, 14 ft·lbf) 6 To check the spark plugs 1. Check that the porcelain insulator around the center electrode on each spark plug is a medium-tolight tan (the ideal color when the vehicle is ridden normally). 2. Check that all spark plugs installed in the engine have the same color. NOTE: If any spark plug shows a distinctly different color, the engine could be operating improperly. Do not attempt to To install a spark plug 1. Measure the spark plug gap with a wire thickness gauge and, if necessary, adjust the gap to specification. NOTE: If a torque wrench is not available when installing a spark plug, a good estimate of the correct torque is 1/4-1/2 turn past finger tight. However, the spark plug should be tightened to the specified torque as soon as possible. 4. Install the spark plug cap. 5. Place the spark plug cover in the original position. 1. Spark plug gap 6-9