2007 Yamaha Motorsports Rhino 660 Auto. 4x4 Owners Manual - Page 107
2007 Yamaha Motorsports Rhino 660 Auto. 4x4 Manual
Page 107 highlights
Skip steps 5-7 if the oil filter cartridge is not being replaced. 5. Remove the oil filter cartridge with an oil filter wrench. An oil filter wrench is available from a Yamaha dealer. 6. Apply a light coat of clean engine oil to the O-ring of the new oil filter cartridge. Make sure the O-ring is seated properly. 1. O-ring 1. Oil filter cartridge 2. Oil filter wrench 7. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque with a torque wrench. Tightening torque: Oil filter cartridge: 17 Nm (1.7 m·kgf, 12 ft·lbf) 8-12
8-12
Skip steps 5–7 if the oil filter cartridge is not
being replaced.
5.
Remove the oil filter cartridge with an oil
filter wrench. An oil filter wrench is avail-
able from a Yamaha dealer.
1.
Oil filter cartridge
2.
Oil filter wrench
6.
Apply a light coat of clean engine oil to
the O-ring of the new oil filter cartridge.
Make sure the O-ring is seated properly.
1. O-ring
7.
Install the new oil filter cartridge with an
oil filter wrench, and then tighten it to the
specified torque with a torque wrench.
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)