2007 Yamaha Motorsports Midnight Warrior Owners Manual - Page 54

2007 Yamaha Motorsports Midnight Warrior Manual

Get 2007 Yamaha Motorsports Midnight Warrior PDF manuals and user guides View all 2007 Yamaha Motorsports Midnight Warrior manuals

Page 54 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR 10. Remove the clamp from the check hose, and then remove the plug to drain any accumulated water. b. Place the fuel tank in the original position, and then connect fuel hose B and the hoses shown. 1. Air filter element 2. Screw 8. Install a new air filter element by inserting it into the air filter case, then installing the screws. 6 ECA10480 CAUTION: G 1. 2. 3. 4. Air filter check hose Air filter check hose holder Clamp Air filter check hose plug 1. Hose EWA10420 WARNING G G Make sure that the air filter element is properly seated in the air filter case. The engine should never be operated without the air filter element installed, otherwise the piston(s) and/or cylinder(s) may become excessively worn. 9. Remove the air filter check hose from the air filter check hose holder. 11. Install the plug and the clamp. 12. Install the air filter check hose. 13. Install the air filter case cover by installing the screws. 14. Install the air filter case by pushing it onto the air filter case joint, and then tightening the clamp bolt. 15. Install the air filter case by installing the bolts. 16. Install the fuel tank as follows. a. Install the foam damper. 6-15 G Before installing the fuel tank, make sure that the fuel hoses are not damaged. If any fuel hose is damaged, do not start the engine but have a Yamaha dealer replace the hose, otherwise fuel may leak. Make sure that the fuel hoses are properly connected and routed, and not pinched. c. Install the nuts.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
PERIODIC MAINTENANCE AND MINOR REPAIR
6-15
6
8.
Install a new air filter element by in-
serting it into the air filter case,
then installing the screws.
CAUTION:
ECA10480
●
Make sure that the air filter ele-
ment is properly seated in the
air filter case.
●
The engine should never be op-
erated without the air filter ele-
ment installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.
9. Remove the air filter check hose
from the air filter check hose hold-
er.
10.
Remove the clamp from the check
hose, and then remove the plug to
drain any accumulated water.
11.
Install the plug and the clamp.
12.
Install the air filter check hose.
13.
Install the air filter case cover by in-
stalling the screws.
14.
Install the air filter case by pushing
it onto the air filter case joint, and
then tightening the clamp bolt.
15.
Install the air filter case by install-
ing the bolts.
16.
Install the fuel tank as follows.
a.
Install the foam damper.
b.
Place the fuel tank in the origi-
nal position, and then connect
fuel hose B and the hoses
shown.
WARNING
EWA10420
●
Before installing the fuel tank,
make sure that the fuel hoses
are not damaged. If any fuel
hose is damaged, do not start
the engine but have a Yamaha
dealer replace the hose, other-
wise fuel may leak.
●
Make sure that the fuel hoses
are properly connected and
routed, and not pinched.
c.
Install the nuts.
1.
Air filter element
2. Screw
1.
Air filter check hose
2.
Air filter check hose holder
3. Clamp
4.
Air filter check hose plug
1. Hose