2007 Yamaha Motorsports Grizzly 700 4x4 EPS Owners Manual - Page 28
2007 Yamaha Motorsports Grizzly 700 4x4 EPS Manual
Page 28 highlights
4 To change from two-wheel drive to four-wheel drive, stop the ATV and push the switch in to the "4WD" position. Then, the four-wheel-drive indicator " " comes on in the multifunction meter unit display. To change from four-wheel drive to two-wheel drive, stop the ATV and push the switch in to the "2WD" position. WHAT CAN HAPPEN The ATV handles differently in two-wheel drive than in four-wheel drive in some circumstances. Changing from two-wheel drive to four-wheel drive or from four-wheel drive to two-wheel drive while moving may cause the ATV to unexpectedly handle differently. This could distract the operator and increase the risk of losing control and of causing an accident. HOW TO AVOID THE HAZARD Always stop the ATV before changing from two-wheel drive to four-wheel drive or viceversa. EBU18242 1. On-Command four-wheel-drive switch "2WD"/"4WD" EWB00120 WARNING POTENTIAL HAZARD Changing from two-wheel drive to fourwheel drive or from four-wheel drive to twowheel drive while the ATV is moving. 4-10 On-Command differential gear lock switch "4WD"/"LOCK" This ATV is equipped with a switch allowing you to lock the differential gear when in four-wheel drive. Select the appropriate switch position according to the terrain and the conditions. G "4WD" (four-wheel drive): Power is supplied to the rear and front wheels.