2007 Yamaha Motorsports Big Bear 400 4x4 IRS Owners Manual - Page 105
2007 Yamaha Motorsports Big Bear 400 4x4 IRS Manual
Page 105 highlights
ECB00310 CAUTION: When removing the engine oil drain bolt, the compression spring, oil strainer and O-ring will fall out. Take care not to lose these parts. NOTE: Skip steps 5-9 if the oil filter element is not being cleaned. 5. Remove the oil filter element cover by removing the bolts, and then remove the oil filter element. 1. O-ring 2. Oil filter element 6. Clean the oil strainer and oil filter element with solvent. 7. Check the O-rings for damage and replace it if necessary. 8. Install the oil filter element and O-ring. NOTE: Make sure that the O-ring is properly seated. 9. Install the oil filter element cover by installing the bolts, and then tighten them to the specified torque. 8 1. Oil filter element cover 2. Bolt 8-13
8-13
8
CAUTION:
ECB00310
When removing the engine oil drain bolt, the
compression spring, oil strainer and O-ring will
fall out. Take care not to lose these parts.
NOTE:
Skip steps 5–9 if the oil filter element is not being
cleaned.
5.
Remove the oil filter element cover by remov-
ing the bolts, and then remove the oil filter el-
ement.
6.
Clean the oil strainer and oil filter element with
solvent.
7.
Check the O-rings for damage and replace it if
necessary.
8.
Install the oil filter element and O-ring.
NOTE:
Make sure that the O-ring is properly seated.
9.
Install the oil filter element cover by installing
the bolts, and then tighten them to the speci-
fied torque.
1.
Oil filter element cover
2. Bolt
1. O-ring
2.
Oil filter element