2006 Yamaha Motorsports VMAX Owners Manual - Page 72

2006 Yamaha Motorsports VMAX Manual

Get 2006 Yamaha Motorsports VMAX PDF manuals and user guides View all 2006 Yamaha Motorsports VMAX manuals

Page 72 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR G 1 2 3 4 5 6 7 8 9 1. Ignition coil assembly 2. Bolt 3. Coupler G 9. Add distilled water to raise the electrolyte to the maximum level mark. EWA10760 G of water. INTERNAL: Drink large quantities of water or milk and immediately call a physician. EYES: Flush with water for 15 minutes and seek prompt medical attention. Batteries produce explosive hydrogen gas. Therefore, keep sparks, flames, cigarettes, etc., away from the battery and provide sufficient ventilation when charging it in an enclosed space. KEEP THIS AND ALL BATTERIES OUT OF THE REACH OF CHILDREN. G 1. Battery 2. Battery breather hose 3. Pass through the cable guide. G WARNING Electrolyte is poisonous and dangerous since it contains sulfuric acid, which causes severe burns. Avoid any contact with skin, eyes or clothing and always shield your eyes when working near batteries. In case of contact, administer the following FIRST AID. EXTERNAL: Flush with plenty G ECA10610 CAUTION: Use only distilled water, as tap water contains minerals that are harmful to the battery. 10. Check and, if necessary, correct the breather hose routing. 11. Install the ignition coil assemblies by installing the bolts. 12. Connect the couplers. 13. Connect and tighten the positive battery lead and the starter motor lead to the starter motor relay. EWA10780 WARNING Pass the positive battery lead and starter lead through the hole in the ignition coil bracket as shown. Improper routing of these leads could bring about a short circuit, causing the engine and lights to fail and possibly resulting in an accident. 6-32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
PERIODIC MAINTENANCE AND MINOR REPAIR
6-32
1
2
3
4
5
6
7
8
9
9. Add distilled water to raise the
electrolyte to the maximum level
mark.
WARNING
EWA10760
●
Electrolyte is poisonous and
dangerous since it contains sul-
furic acid, which causes severe
burns. Avoid any contact with
skin, eyes or clothing and al-
ways shield your eyes when
working near batteries. In case
of contact, administer the fol-
lowing FIRST AID.
●
EXTERNAL: Flush with plenty
of water.
●
INTERNAL: Drink large quan-
tities of water or milk and im-
mediately call a physician.
●
EYES: Flush with water for 15
minutes and seek prompt
medical attention.
●
Batteries produce explosive hy-
drogen gas. Therefore, keep
sparks, flames, cigarettes, etc.,
away from the battery and pro-
vide sufficient ventilation when
charging it in an enclosed
space.
●
KEEP THIS AND ALL BATTER-
IES OUT OF THE REACH OF
CHILDREN.
CAUTION:
ECA10610
Use only distilled water, as tap water
contains minerals that are harmful
to the battery.
10. Check and, if necessary, correct
the breather hose routing.
11. Install the ignition coil assemblies
by installing the bolts.
12. Connect the couplers.
13. Connect and tighten the positive
battery lead and the starter motor
lead to the starter motor relay.
WARNING
EWA10780
Pass the positive battery lead and
starter lead through the hole in the
ignition coil bracket as shown. Im-
proper routing of these leads could
bring about a short circuit, causing
the engine and lights to fail and pos-
sibly resulting in an accident.
1. Ignition coil assembly
2. Bolt
3. Coupler
1. Battery
2. Battery breather hose
3. Pass through the cable guide.