2005 Yamaha Motorsports Virago 250 Owners Manual - Page 71
2005 Yamaha Motorsports Virago 250 Manual
Page 71 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR a jack either under each side of the frame in front of the rear wheel or under each side of the swingarm. EAU24360 Front wheel EAU24600 To remove the front wheel EWA10820 WARNING G G It is advisable to have a Yamaha dealer service the wheel. Securely support the motorcycle so that there is no danger of it falling over. 1. Wheel axle 2. Front wheel axle pinch bolt 1. Disconnect the speedometer cable from the front wheel. 3. Lift the front wheel off the ground according to the procedure on page 6-34. 4. Pull the wheel axle out, and then remove the wheel. ECA11070 6 CAUTION: Do not apply the brake after the wheel has been removed together with the brake disc, otherwise the brake pads will be forced shut. 1. Speedometer cable 2. Loosen the front wheel axle pinch bolt, then the wheel axle. EAU24931 To install the front wheel 1. Install the speedometer gear unit into the wheel hub so that the projections mesh with the slots. 6-35