2005 Yamaha Motorsports Vino 125 Owners Manual - Page 27

2005 Yamaha Motorsports Vino 125 Manual

Page 27 highlights

INSTRUMENT AND CONTROL FUNCTIONS NOTE: This check is most reliable if performed with a warmedup engine. With the engine turned off: 1. Move the sidestand down. 2. Make sure that the engine stop switch is turned on. 3. Turn the key on. 4. Keep the front or rear brake applied. 5. Push the start switch. Does the engine start? NO YES 1 2 3 The sidestand switch may be defective. The scooter should not be ridden until checked by a Yamaha dealer. 4 5 6 With the engine still off: 6. Move the sidestand up. 7. Keep the front or rear brake applied. 8. Push the start switch. Does the engine start? YES With the engine still running: 9. Move the sidestand down. Does the engine stall? YES NO The sidestand switch may be defective. The scooter should not be ridden until checked by a Yamaha dealer. NO The brake switch may be defective. The scooter should not be ridden until checked by a Yamaha dealer. 7 8 9 The system is OK. The scooter can be ridden. 3-10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

3-10
1
2
3
4
5
6
7
8
9
INSTRUMENT AND CONTROL FUNCTIONS
NOTE:
This check is most reliable if performed with a warmed-
up engine.
The sidestand switch may be defective.
The scooter should not be ridden
until checked by a
Yamaha dealer.
The brake switch may be defective.
The scooter should not be ridden
until checked by a
Yamaha dealer.
The sidestand switch may be defective.
The scooter should not be ridden
until checked by a
Yamaha dealer.
With the engine turned off:
1.
Move the sidestand down.
2.
Make sure that the engine stop switch is turned on.
3.
Turn the key on.
4.
Keep the front or rear brake applied.
5.
Push the start switch.
Does the engine start?
With the engine still off:
6.
Move the sidestand up.
7.
Keep the front or rear brake applied.
8.
Push the start switch.
Does the engine start?
With the engine still running:
9.
Move the sidestand down.
Does the engine stall?
The system is OK.
The scooter can be ridden.
NO
YES
YES
NO
YES
NO