2005 Yamaha Motorsports V Star Custom Owners Manual - Page 78

2005 Yamaha Motorsports V Star Custom Manual

Get 2005 Yamaha Motorsports V Star Custom PDF manuals and user guides View all 2005 Yamaha Motorsports V Star Custom manuals

Page 78 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR 5. Tighten the wheel axle and front wheel axle pinch bolt to the specified torques, and then install the rubber cap. Tightening torques: Wheel axle: 59 Nm (5.9 m·kgf, 43 ft·lbf) Front wheel axle pinch bolt: 20 Nm (2.0 m·kgf, 14 ft·lbf) EAU25080 Rear wheel EAU25141 To remove the rear wheel EWA10820 4. Remove the brake pedal free play adjusting nut, and then disconnect the brake rod from the brake camshaft lever. WARNING G G 6 6. While applying the front brake, push down hard on the handlebars several times to check if the front fork compresses and rebounds smoothly. 7. Connect the speedometer cable. It is advisable to have a Yamaha dealer service the wheel. Securely support the motorcycle so that there is no danger of it falling over. 1. Loosen the axle nut. 1. 2. 3. 4. 5. 6. Brake pedal free play adjusting nut Brake camshaft lever Brake rod Bolt and nut (shoe plate) Brake torque rod Nut 1. Axle nut 5. Remove panel A. (See page 6-8.) 6. Remove the bolts that secure the final gear case to the swingarm. 2. Disconnect the brake torque rod from the brake shoe plate by removing the bolt and nut. 3. Loosen the brake torque rod nut at the swingarm. 6-35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
PERIODIC MAINTENANCE AND MINOR REPAIR
6-35
6
5. Tighten the wheel axle and front
wheel axle pinch bolt to the speci-
fied torques, and then install the
rubber cap.
6. While applying the front brake,
push down hard on the handlebars
several times to check if the front
fork compresses and rebounds
smoothly.
7.
Connect the speedometer cable.
EAU25080
Rear wheel
EAU25141
To remove the rear wheel
WARNING
EWA10820
●
It is advisable to have a Yamaha
dealer service the wheel.
●
Securely support the motor-
cycle so that there is no danger
of it falling over.
1.
Loosen the axle nut.
2. Disconnect the brake torque rod
from the brake shoe plate by re-
moving the bolt and nut.
3.
Loosen the brake torque rod nut at
the swingarm.
4.
Remove the brake pedal free play
adjusting nut, and then disconnect
the brake rod from the brake cam-
shaft lever.
5.
Remove panel A. (See page 6-8.)
6.
Remove the bolts that secure the
final gear case to the swingarm.
Tightening torques:
Wheel axle:
59 Nm (5.9 m·kgf, 43 ft·lbf)
Front wheel axle pinch bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)
1.
Axle nut
1.
Brake pedal free play adjusting nut
2.
Brake camshaft lever
3.
Brake rod
4.
Bolt and nut (shoe plate)
5.
Brake torque rod
6. Nut