2005 Yamaha Motorsports Road Star Owners Manual - Page 81

2005 Yamaha Motorsports Road Star Manual

Page 81 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR EAU24180 EAU24201 EAU31961 Tail/brake light This model is equipped with an LED type of tail/brake light. If the tail/brake light does not come on, have a Yamaha dealer check it. Replacing a turn signal light bulb 1. Remove the turn signal light lens by removing the screw. Replacing a license plate light bulb 1. Remove the license plate light unit by removing the bolts. 1. Screw 1. Bolt 6 2. Remove the defective bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screw. ECA11190 2. Remove the license plate light socket (together with the bulb) by turning it counterclockwise, and then pulling it out. CAUTION: Do not overtighten the screw, otherwise the lens may break. 6-36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105

PERIODIC MAINTENANCE AND MINOR REPAIR
6-36
6
EAU24180
Tail/brake light
This model is equipped with an LED
type of tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
EAU24201
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3.
Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
CAUTION:
ECA11190
Do not overtighten the screw, other-
wise the lens may break.
EAU31961
Replacing a license plate light
bulb
1.
Remove the license plate light unit
by removing the bolts.
2. Remove the license plate light
socket (together with the bulb) by
turning it counterclockwise, and
then pulling it out.
1. Screw
1. Bolt