2005 Yamaha Motorsports RX-1 Owners Manual - Page 94
2005 Yamaha Motorsports RX-1 Manual
Page 94 highlights
2. Open the shroud. 3. Remove the red (+) lead from the lead holder and move it away from the black (-) lead. 5. Connect the other end of the red (+) jumper cable to the positive (+) terminal of the booster battery. 6. Connect the black (-) jumper cable to the negative (-) terminal of the booster battery. 7. Pull the black (-) lead cover to expose the terminal through the slit in the cover, and then connect the black (-) jumper cable to the black terminal of the discharged battery. CAUTION: @ Be sure to connect the red (+) jumper cable to the red (+) lead and the black (-) jumper cable to the black (-) lead. Do not reverse the connections. @ 4. Pull the red (+) lead cover to expose the terminal through the slit in the cover, and then connect the red (+) jumper cable to the red terminal of the discharged battery. 8. Start the engine. 9. Disconnect the black (-) jumper cable from the black (-) connecting lead, and then pull the cover completely over the lead terminal. 10. Disconnect the black (-) jumper cable from the negative (-) terminal of the booster battery. 11. Disconnect the red (+) jumper cable from the positive (+) terminal of the booster battery. 12. Disconnect the red (+) jumper cable from the red (+) connecting lead, and then pull the cover completely over the lead terminal. 13. Install the red (+) lead into the lead holder. 9-2