2005 Yamaha Motorsports Kodiak 400 Auto. 4x4 Owners Manual - Page 127
2005 Yamaha Motorsports Kodiak 400 Auto. 4x4 Manual
Page 127 highlights
10. Install the engine oil drain bolt, and then tighten it to the specified torque. Tightening torque: Engine oil drain bolt: 23 Nm (2.3 m·kgf, 16 ft·lbf) 11. Add the specified amount of recommended engine oil, and then install the engine oil filler cap and tighten it. Recommended engine oil: See page 10-2. Oil quantity: Without oil filter cartridge replacement: 2.30 L (2.02 Imp qt, 2.43 US qt) With oil filter cartridge replacement: 2.40 L (2.11 Imp qt, 2.54 US qt) CAUTION: _ G G _ In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives. Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified. In addition, do not use oils labeled "ENERGY CONSERVING II" or higher. Make sure that no foreign material enters the crankcase. 12. Start the engine and warm it up for several minutes. While warming up, check for oil leakage. If oil leakage is found, turn the engine off immediately and check for the cause. 13. Turn the engine off, and then check the oil level and correct it if necessary. 14. Install panel F. 8-17