2004 Yamaha Motorsports Zuma Owners Manual - Page 26
2004 Yamaha Motorsports Zuma Manual
Page 26 highlights
INSTRUMENT AND CONTROL FUNCTIONS 3 To install the fuel tank cap Insert the fuel tank cap into the tank opening with the mark on the cap and fuel filler aligned. Turn the lever to the "LOCK" position, and then push it down. EW000023 1 2 3 2 1. Fuel tank cap 2. Oil tank cap 3. Fuel tank cap lock lever 1 w Make sure that the fuel tank cap is properly closed and locked before riding. 2-stroke engine oil tank cap Remove the 2-stroke engine oil tank cap by turning it counterclockwise. Install the 2-stroke engine oil tank cap by turning it clockwise. EW000025 1. Fuel tank filler tube 2. Fuel level EAU03753 Fuel Make sure that there is sufficient fuel in the tank. Fill the fuel tank to the bottom of the filler tube as shown. EW000130 Fuel and 2-stroke engine oil tank caps The fuel tank cap and the 2-stroke engine oil tank cap are located under the seat. (See page 3-8 for seat opening and closing procedures.) Fuel tank cap To remove the fuel tank cap Lift the fuel tank cap lock lever and then turn it from the "LOCK" position to the "OPEN" position. The fuel tank cap can then be removed. w Do not overfill the fuel tank, otherwise it may overflow when the fuel warms up and expands. Avoid spilling fuel on the hot engine. w Make sure that the fuel and 2-stroke engine oil tank caps are properly installed before riding the scooter. 3-6