2004 Yamaha Motorsports Virago 250 Owners Manual - Page 69

2004 Yamaha Motorsports Virago 250 Manual

Get 2004 Yamaha Motorsports Virago 250 PDF manuals and user guides View all 2004 Yamaha Motorsports Virago 250 manuals

Page 69 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR 7. Push down hard on the handlebar several times to check for proper fork operation. 8. Connect the speedometer cable. EAU25080 Rear wheel EAU32750 To remove the rear wheel EWA10820 WARNING G G 1. Speedometer gear unit 2. Retainer 3. Speedometer cable It is advisable to have a Yamaha dealer service the wheel. Securely support the motorcycle so that there is no danger of it falling over. 3. Insert the wheel axle. 4. Lower the front wheel so that it is on the ground. 5. Tighten the wheel axle to the specified torque. Tightening torque: Wheel axle: 59 Nm (5.9 m·kgf, 43 ft·lbf) 1. Remove the axle nut cotter pin. 2. Loosen the chain puller locknut and the drive chain slack adjusting nut on both ends of the swingarm. 6 6. Tighten the front wheel axle pinch bolt to the specified torque. Tightening torque: Front wheel axle pinch bolt: 20 Nm (2.0 m·kgf, 14 ft·lbf) 6-34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
PERIODIC MAINTENANCE AND MINOR REPAIR
6-34
6
3.
Insert the wheel axle.
4.
Lower the front wheel so that it is
on the ground.
5.
Tighten the wheel axle to the spec-
ified torque.
6.
Tighten the front wheel axle pinch
bolt to the specified torque.
7.
Push down hard on the handlebar
several times to check for proper
fork operation.
8.
Connect the speedometer cable.
EAU25080
Rear wheel
EAU32750
To remove the rear wheel
WARNING
EWA10820
●
It is advisable to have a Yamaha
dealer service the wheel.
●
Securely support the motor-
cycle so that there is no danger
of it falling over.
1.
Remove the axle nut cotter pin.
2. Loosen the chain puller locknut
and the drive chain slack adjusting
nut on both ends of the swingarm.
1.
Speedometer gear unit
2. Retainer
3.
Speedometer cable
Tightening torque:
Wheel axle:
59 Nm (5.9 m·kgf, 43 ft·lbf)
Tightening torque:
Front wheel axle pinch bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)