2004 Yamaha Motorsports V Star 1100 Classic Owners Manual - Page 56

2004 Yamaha Motorsports V Star 1100 Classic Manual

Get 2004 Yamaha Motorsports V Star 1100 Classic PDF manuals and user guides View all 2004 Yamaha Motorsports V Star 1100 Classic manuals

Page 56 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR 2. Remove the oil filler bolt and drain bolt to drain the oil from the final gear case. 3. Install the final gear oil drain bolt, and then tighten it to the specified torque. Tightening torque: Final gear oil drain bolt: 23 Nm (2.3 m·kgf, 16.5 ft·lbf) EAU20670 Cleaning the air filter element The air filter element should be cleaned as follows at the intervals specified in the periodic maintenance and lubrication chart. Clean the air filter element more frequently if you are riding in unusually wet or dusty areas. 1. Remove the air filter case cover by removing the screws. 4. Insert the air filter element into the air filter case as shown. 4. Add the recommended final gear oil to the brim of the filler hole. Recommended final gear oil: Hypoid gear oil SAE 80 (API GL4) or multi-grade hypoid gear oil SAE 80W-90 Oil quantity: 0.20 L (0.21 US qt) (0.18 Imp.qt) 6 NOTE: GL4 is a quality rating. Hypoid gear oils rated GL5 or GL6 may also be used. 5. Install and tighten the oil filler bolt. 6. Check the final gear case for oil leakage. If oil is leaking, check for the cause. 1. Air filter case cover 2. Screw 2. Pull the air filter element out. 3. Lightly tap the air filter element to remove most of the dust and dirt, and then blow the remaining dirt out with compressed air as shown. If the air filter element is damaged, replace it. 6-13 1. Air filter element 2. Projection 3. Slot

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
PERIODIC MAINTENANCE AND MINOR REPAIR
6-13
6
2.
Remove the oil filler bolt and drain
bolt to drain the oil from the final
gear case.
3.
Install the final gear oil drain bolt,
and then tighten it to the specified
torque.
4. Add the recommended final gear
oil to the brim of the filler hole.
NOTE:
GL4 is a quality rating. Hypoid gear oils
rated GL5 or GL6 may also be used.
5.
Install and tighten the oil filler bolt.
6. Check the final gear case for oil
leakage. If oil is leaking, check for
the cause.
EAU20670
Cleaning the air filter element
The air filter element should be cleaned
as follows at the intervals specified in
the periodic maintenance and lubrica-
tion chart. Clean the air filter element
more frequently if you are riding in un-
usually wet or dusty areas.
1.
Remove the air filter case cover by
removing the screws.
2.
Pull the air filter element out.
3.
Lightly tap the air filter element to
remove most of the dust and dirt,
and then blow the remaining dirt
out with compressed air as shown.
If the air filter element is damaged,
replace it.
4.
Insert the air filter element into the
air filter case as shown.
Tightening torque:
Final gear oil drain bolt:
23 Nm (2.3 m·kgf, 16.5 ft·lbf)
Recommended final gear oil:
Hypoid gear oil SAE 80 (API GL4) or
multi-grade hypoid gear oil SAE
80W-90
Oil quantity:
0.20 L (0.21 US qt) (0.18 Imp.qt)
1.
Air filter case cover
2. Screw
1.
Air filter element
2. Projection
3. Slot