2004 Yamaha Motorsports Road Star Owners Manual - Page 29
2004 Yamaha Motorsports Road Star Manual
Page 29 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU13780 EAU14150 Locking the steering with a padlock Rider seat To remove the rider seat 1. Insert the key into the main switch, and then turn it counterclockwise to "OPEN". 3 1. Projection 2. Seat holder In addition to the main switch/steering lock, there are brackets on the right side of the steering head pipe for locking the steering with a padlock. To do so, turn the handlebar until the holes in the two brackets are aligned, and then lock the steering with a suitable padlock. 2. Remove the key from the main switch if the scooter will be left unattended. NOTE: Make sure that the rider seat is properly secured before riding. NOTE: Do not push inward when turning the key. 2. Pull the rider seat off. To install the rider seat 1. Insert the projection on the rear of the rider seat into the seat holder as shown, and then push the front of the seat down to lock it in place. 3-10