2004 Yamaha Motorsports Road Star Silverado Owners Manual - Page 75

2004 Yamaha Motorsports Road Star Silverado Manual

Page 75 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR EAU23521 Replacing the fuses 1. Bolt The main fuse and the fuse box, which contains the fuses for the individual circuits, are located behind panel A. (See page 6-8.) If a fuse is blown, replace it as follows. 1. Turn the key to "OFF" and turn off the electrical circuit in question. 2. Remove the blown fuse, and then install a new fuse of the specified amperage. 1. 2. 3. 4. 5. 6. Signaling system fuse Ignition fuse Headlight fuse Carburetor heater fuse Odometer and clock fuse (backup) Spare fuse Specified fuses: Main fuse: 30.0 A Headlight fuse: 15.0 A Signaling system fuse: 10.0 A Ignition fuse: 15.0 A Odometer and clock fuse (backup): 5.0 A Carburetor heater fuse: 10.0 A ECA10640 CAUTION: Do not use a fuse of a higher amperage rating than recommended to avoid causing extensive damage to the electrical system and possibly a fire. 3. Turn the key to "ON" and turn on the electrical circuit in question to check if the device operates. 4. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. 6 1. Main fuse 2. Spare main fuse 6-32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101

PERIODIC MAINTENANCE AND MINOR REPAIR
6-32
6
EAU23521
Replacing the fuses
The main fuse and the fuse box, which
contains the fuses for the individual cir-
cuits, are located behind panel A. (See
page 6-8.)
If a fuse is blown, replace it as follows.
1.
Turn the key to “OFF” and turn off
the electrical circuit in question.
2.
Remove the blown fuse, and then
install a new fuse of the specified
amperage.
CAUTION:
ECA10640
Do not use a fuse of a higher amper-
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
3.
Turn the key to “ON” and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
1. Bolt
1.
Signaling system fuse
2.
Ignition fuse
3.
Headlight fuse
4.
Carburetor heater fuse
5.
Odometer and clock fuse (backup)
6.
Spare fuse
1.
Main fuse
2.
Spare main fuse
Specified fuses:
Main fuse:
30.0 A
Headlight fuse:
15.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
15.0 A
Odometer and clock fuse (backup):
5.0 A
Carburetor heater fuse:
10.0 A