2004 Yamaha Motorsports Kodiak 400 Automatic Owners Manual - Page 125
2004 Yamaha Motorsports Kodiak 400 Automatic Manual
Page 125 highlights
EBU01145 CAUTION: _ G G _ In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives. Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified. In addition, do not use oils labeled "ENERGY CONSERVING II" or higher. Make sure that no foreign material enters the crankcase. Final gear oil Final gear oil measurement 1. Place the machine on a level surface. 2. Remove the oil filler bolt, and then check the oil level in the final gear case. NOTE: The oil level should be at the brim of the filler hole. _ _ 12. Start the engine and warm it up for several minutes. While warming up, check for oil leakage. If oil leakage is found, turn the engine off immediately and check for the cause. 13. Turn the engine off, and then check the oil level and correct it if necessary. 14. Install panel F. 1. Final gear oil 2. Final gear oil filler bolt 3. Proper oil level 8-18