2004 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 25
2004 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 25 highlights
EBU00056 EBU14770 Start switch "START" The starter motor cranks the engine when this switch is pushed. cC See starting instructions prior to starting engine (see page 6-1 for details). Light switch "LIGHTS" Set the switch to the "LO" position to turn on the low beam and the taillight. Set the switch to the "HI" position to turn on the high beam and the taillight. Set the switch to the "OFF" position to turn off all of the lights. NOTE: If the starter switch is pushed with the main switch "ON" and the engine stop switch "OFF", the starter motor will be activated but the engine will not start. To start the engine, be sure to position the engine stop switch at "RUN". cC Do not use the headlights with the engine turned off for an extended period of time, otherwise the battery may discharge to the point that the starter motor will not operate properly. If this should happen, remove the battery and recharge it. 4-3