2003 Yamaha Motorsports Grizzly 660 Auto. 4x4 Owners Manual - Page 133
2003 Yamaha Motorsports Grizzly 660 Auto. 4x4 Manual
Page 133 highlights
EBU00706 Differential gear oil Differential gear oil measurement 1. Place the machine on a level place. 2. Remove the oil filler bolt and check the oil level. It should be up to the brim of the hole. If the level is low, add sufficient oil to raise it to the specified level. 3. Install the oil filler bolt and tighten it to the specified torque. Tightening torque: Oil filler bolt: 23 Nm (2.3 m·kgf, 16 ft·lbf) Differential gear oil replacement 1. Place the machine on a level place. 2. Place a container under the differential gear case to catch the oil. 3. Remove the filler bolt and drain bolt to drain the oil. 1. Differential gear oil 2. Differential gear case oil filler bolt 3. Specified level CAUTION: _ Be sure no foreign material enters the differential gear case. _ 1. Differential gear case oil drain bolt 8-18