2002 Yamaha Motorsports Vino Classic Owners Manual - Page 57
2002 Yamaha Motorsports Vino Classic Manual
Page 57 highlights
EAU03434 SCOOTER CARE AND STORAGE Care While the open design of a scooter reveals the attractiveness of the technology, it also makes it more vulnerable. Rust and corrosion can develop even if high-quality components are used. A rusty exhaust pipe may go unnoticed on a car, however, it detracts from the overall appearance of a scooter. Frequent and proper care does not only comply with the terms of the warranty, but it will also keep your scooter looking good, extend its life and optimize its performance. Before cleaning 1. Cover the muffler outlet with a plastic bag after the engine has cooled down. 2. Make sure that all caps and covers as well as all electrical couplers and connectors, including the spark plug cap, are tightly installed. 3. Remove extremely stubborn dirt, like oil burnt onto the crankcase, with a degreasing agent and a brush, but never apply such products onto seals, gaskets and wheel axles. Always rinse the dirt and degreaser off with water. Cleaning cC ECA00011 8 Avoid using strong acidic wheel cleaners, especially on spoked wheels. If such products are used on hard-toremove dirt, do not leave the cleaner on the affected area any longer than instructed. Also, thoroughly rinse the area off with water, immediately dry it, and then apply a corrosion protection spray. 8 Improper cleaning can damage windshields, cowlings, panels and other plastic parts. Use only a soft, clean cloth or sponge with mild detergent and water to clean plastic. 7 7-1