2002 Yamaha Motorsports VMAX Owners Manual - Page 89

2002 Yamaha Motorsports VMAX Manual

Page 89 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR G KEEP THIS AND ALL BATTERIES OUT OF THE REACH OF CHILDREN. EC000100 _ CAUTION: Use only distilled water, as tap water contains minerals that are harmful to the battery. _ _ 1. Battery 2. Battery breather hose 3. Pass through the cable guide. 1. Positive battery lead (red) 2. Starter motor lead (black) 10. Check and, if necessary, correct the breather hose routing. 11. Install the ignition coil assemblies by installing the bolts. 12. Connect the couplers. 13. Connect and tighten the positive battery lead and the starter motor lead to the starter motor relay. EW000118 6 WARNING Pass the positive battery lead and starter lead through the hole in the ignition coil bracket as shown. Improper routing of these leads could bring about a short circuit, causing the engine and lights to fail and possibly resulting in an accident. _ _ 14. Connect and tighten the negative battery lead to the battery. 15. Install the rider seat. 6-38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125

PERIODIC MAINTENANCE AND MINOR REPAIR
6-38
6
KEEP THIS AND ALL BATTER-
IES OUT OF THE REACH OF
CHILDREN.
_
EC000100
CAUTION:
_
Use only distilled water, as tap water
contains minerals that are harmful
to the battery.
_
10. Check and, if necessary, correct
the breather hose routing.
11.
Install the ignition coil assemblies
by installing the bolts.
12.
Connect the couplers.
13. Connect and tighten the positive
battery lead and the starter motor
lead to the starter motor relay.
EW000118
WARNING
_
Pass the positive battery lead and
starter lead through the hole in the
ignition coil bracket as shown. Im-
proper routing of these leads could
bring about a short circuit, causing
the engine and lights to fail and pos-
sibly resulting in an accident.
_
14.
Connect and tighten the negative
battery lead to the battery.
15.
Install the rider seat.
1. Battery
2.
Battery breather hose
3.
Pass through the cable guide.
1.
Positive battery lead (red)
2.
Starter motor lead (black)