2002 Yamaha Motorsports Road Star Silverado Owners Manual - Page 79
2002 Yamaha Motorsports Road Star Silverado Manual
Page 79 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR ECA00025 EAU04034 CAUTION: Improper drive belt slack will overload the engine. Keep the drive belt slack within the specified range. @ @ Checking and lubricating the throttle grip and cable The operation of the throttle grip should be checked before each ride. In addition, the cable should be lubricated or replaced at the intervals specified in the periodic maintenance chart. 5. Tighten the axle nut and the brake caliper bracket bolt to the specified torques. 1. Drive belt slack adjusting bolt (× 2) 2. Locknut (× 2) 3. Wheel axle 6 2. Loosen the drive belt puller locknut on each side of the swingarm. 3. To tighten the drive belt, turn the adjusting bolt on each side of the swingarm in direction a . To loosen the drive belt, turn the adjusting bolt on each side of the swingarm in direction b , and then push the rear wheel forward. NOTE: Turn each adjusting bolt the same amount for proper wheel alignment. @ @ Tightening torques: Axle nut: 108.5 ft·lb (15 m·kgf, 150 Nm) Brake caliper bracket bolt: 34.7 ft·lb (4.8 m·kgf, 48 Nm) 4. Tighten the locknuts. 6-27