2002 Yamaha Motorsports Breeze Owners Manual - Page 123
2002 Yamaha Motorsports Breeze Manual
Page 123 highlights
4. After adjusting, be sure to tighten the chain adjuster locknut and the axle holding bolts. Tightening torque: Chain adjuster locknut: 15.5 Nm (1.55 m0kgf, 11.2 ft0lb) Axle holding bolts (upper): 85 Nm (8.5 m0kgf, 61 ft0lb) Axle holding bolts (lower): 60 Nm (6.0 m0kgf, 43 ft0b) 5. Finger tighten the hub stopper bolt and tighten the hub stopper bolt locknut. Tightening torque: Hub stopper bolt locknut 15.5 Nm (1.55 m0kgf, 11.2 ft0lb) cC If measurement A of the chain adjuster is less than 27 mm (1.06in), ask a Yamaha dealer to replace the drive chain. A A. 27 mm (1.06 in) 8-26
4. After adjusting, be sure to tighten the chain
adjuster locknut and the axle holding bolts.
5.
Finger tighten the hub stopper bolt and tight-
en the hub stopper bolt locknut.
c
C
If measurement
A
of the chain adjuster is
less than 27 mm (1.06in), ask a Yamaha deal-
er to replace the drive chain.
Tightening torque:
Chain adjuster locknut:
15.5 Nm (1.55 m
0
kgf, 11.2 ft
0
lb)
Axle holding bolts (upper):
85 Nm (8.5 m
0
kgf, 61 ft
0
lb)
Axle holding bolts (lower):
60 Nm (6.0 m
0
kgf, 43 ft
0
b)
Tightening torque:
Hub stopper bolt locknut
15.5 Nm (1.55 m
0
kgf, 11.2 ft
0
lb)
A
A. 27 mm (1.06 in)
8-26