2002 Yamaha Motorsports Big Bear 400 Owners Manual - Page 30
2002 Yamaha Motorsports Big Bear 400 Manual
Page 30 highlights
EBU00053 EBU00607 Handlebar switches Start switch " " The starter motor cranks the engine when this switch is pushed. CAUTION: See starting instructions prior to starting the engine. (See page 6-1 for details.) _ EBU00735 1. Lights switch "LIGHTS" 2. Engine stop switch " "/" 3. Start switch " " " EBU00849 Light switch Turn the switch to the " " position to switch on the low beam and the taillight. Turn the switch to the " " position to switch on the high beam and the taillight. Turn the switch to the "OFF" position to switch off the headlight and the taillight. Engine stop switch " "/" " Make sure that the engine stop switch is in the " " position. The engine stop switch controls ignition and can be used at all times to stop the engine, especially in an emergency. The engine will not start or run when the engine stop switch is turned to " ". 4-5 CAUTION: Do not use the headlight with the engine turned off for more than thirty minutes. The battery may discharge to the point that the starter motor will not operate properly. If this should happen, remove the battery and recharge it.