2002 Yamaha Motorsports Big Bear 400 4x4 Owners Manual - Page 118

2002 Yamaha Motorsports Big Bear 400 4x4 Manual

Get 2002 Yamaha Motorsports Big Bear 400 4x4 PDF manuals and user guides View all 2002 Yamaha Motorsports Big Bear 400 4x4 manuals

Page 118 highlights

6. Clean the oil strainer and oil filter element with solvent. 7. Check the O-ring for damage and replace it if damaged. 8. Install the oil filter element, and O-ring. 9. Install the oil filter cover by installing the bolts. 10. Install the oil strainer, compression spring and drain bolt. Tighten the drain bolt to the specified torque. Tightening torque: Drain bolt (engine): 32 Nm (3.2 m·kgf, 23 ft·lb) Filter cover bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lb) 11. Fill the engine with oil, and then install the dipstick. Recommended oil: See page 5-7. Oil quantity: Periodic oil change: 2.9 L (2.6 lmp qt, 3.1 US qt) With oil filter replacement: 3.0 L (2.6 lmp qt, 3.2 US qt) Total amount: 3.5 L (3.1 lmp qt, 3.7 US qt) CAUTION: _ Before installing the drain bolt, be sure to install the O-ring, compression spring and oil strainer. _ CAUTION: _ Be sure no foreign material enters the crankcase. _ 1. O-ring 2. Oil filter element 8-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
8-7
6.
Clean the oil strainer and oil filter element
with solvent.
7.
Check the O-ring for damage and re-
place it if damaged.
8.
Install the oil filter element, and O-ring.
9.
Install the oil filter cover by installing the
bolts.
10. Install the
oil strainer,
compression
spring and drain bolt. Tighten the drain
bolt to the specified torque.
CAUTION:
_
Before installing the drain bolt, be sure to
install the O-ring, compression spring and
oil strainer.
_
1.
O-ring
2.
Oil filter element
11.
Fill the engine with oil, and then install the
dipstick.
CAUTION:
_
Be sure no foreign material enters the
crankcase.
_
Tightening torque:
Drain bolt (engine):
32 Nm (3.2 m·kgf, 23 ft·lb)
Filter cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lb)
Recommended oil: See page 5-7.
Oil quantity:
Periodic oil change:
2.9 L (2.6 lmp qt, 3.1 US qt)
With oil filter replacement:
3.0 L (2.6 lmp qt, 3.2 US qt)
Total amount:
3.5 L (3.1 lmp qt, 3.7 US qt)