2001 Yamaha Motorsports Beartracker Owners Manual - Page 110
2001 Yamaha Motorsports Beartracker Manual
Page 110 highlights
6. Clean the oil strainer and oil filter with solvent. 7. Inspect the O-ring and replace if damaged. 8. Reinstall the oil filter, O-ring, oil filter cover. 9. Replace the oil strainer, compression spring, O-ring and drain plug. Then, tighten the drain plug and oil filter cover bolts to the specified torques. 10. Fill the engine with oil and install the dipstick. Recommended oil: See page 5-7. Oil quantity: Periodic oil change: 1.5 L (1.3 Imp qt, 1.6 US qt) With oil filter replacement: 1.6 L (1.4 Imp qt, 1.7 US qt) Total amount: 1.8 L (1.6 Imp qt, 1.9 US qt) CAUTION: Before reinstalling the drain plug, be sure to install the O-ring, compression spring and oil strainer. Tightening torque: Drain plug (engine): 43 Nm (4,3 m·kg, 31 ft·lb) Filter cover bolt: 10 Nm (1.0 m·kg, 7.2 ft·lb) 8-7 CAUTION: Be sure no foreign material enters the crankcase. 11. Warm up the engine for several minutes at idle speed. Check for oil leakage while warming up.