2011 Volvo XC70 Owner's Manual - Page 191

04 Comfort and driving pleasure Rear Park Assist Camera (PAC)* The markers change color (from yellow to orange to red) as the vehicle comes closer to the object. changed in the settings menu) and the image is shown on the navigation system's display. • Automatic or manual zoom can be selected in the settings menu. • When backing up, two solid lines are proMarker (color) Green Yellow Red Limitations Even if a fairly small section of the screen image appears to be obstructed, this may mean that a relatively large area behind the vehicle is hidden and objects there may not be detected until they are very near the vehicle. Distance to object > 5 ft (1.5 m) 5-1 ft (0.3-1.5) 0-1 ft (0-0.3) jected on the screen to show the path that the vehicle's rear wheels will take. These lines are affected by movements of the steering wheel. The vehicle's approximate outer dimension are shown by two dashed lines. • The graphic lines will not be displayed when backing up with a trailer that is connected to the vehicle's electrical system. NOTE Bicycle carriers or other accessories mounted on the tailgate may obstruct the camera's field of view. 04 Settings To make PAC system settings, press the MENU button in the center console control panel and go to Main menu Car settings and select one of the following: • Objects on the ground that are closer than 1 ft (30 centimeters) cannot be detected by the camera. • The camera is active for approx. 5 seconds after the gear selector is moved to R or until the vehicle's speed exceeds 6 mph (10 km/h). Keep in mind • Keep the camera's lens free of dirt, ice and snow. Remove ice and snow carefully to avoid scratching the lens. Parking camera settings • Mark Park Assist lines to display the sidelines while backing up. • The optional Park Assist sensors and the parking camera work together and information from the sensors is shown graphically on the display. • Clean the lens regularly with warm water and a suitable car washing detergent. • Mark Distance information to display the intersecting lines while backing up. Activating the system • Mark Automatic to activate PAC each time reverse gear is selected. • If the Park Assist* system's sensors detect a trailer, the camera will zoom in on the trailer hitch to help position the trailer's tongue correctly. • Mark Off to turn off PAC completely. Summary • The graphic lines shown on the screen when the vehicle backs up can be disabled in the settings menu. • The camera is activated when the gear selector is moved to R (this can be * Option/accessory, for more information, see Introduction. 191