2011 Volvo S80 Owner's Manual - Page 264

2011 Volvo S80 Manual

Page 264 highlights

07 Maintenance and specifications Replacing bulbs Front fog lights 3. Turn the bulb counterclockwise and remove it. 4. Install a new bulb by turning clockwise. 5. Press the bulb into the holder. (The profile of the bulb holder corresponds to the profile of the foot of the bulb.) 6. Reinstall the bulb holder. The TOP mark on the bulb holder must always be upward. 7. Put the cover back into place. G021753 NOTE Before starting to replace a bulb, see page 260. 1. Remove the covers in the left/right panel to access the bulbs. The bulbs are located in separate bulb holders. 2. Press the catches together and pull out the bulb holder. 3. Remove the defective bulb by pressing it in slightly and turning it before pulling it out. 4. Plug in the connector. 5. Press the bulb holder until it clicks into place and reinstall the cover. Taillight housing License plate lighting 07 1. Remove the cover by pressing in the clips and pulling straight out. 2. Unscrew the fog light housing screw and pull it out. The bulbs in the taillight cluster are replaced from inside the trunk (not the LED functions). G021756 264 G021754

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312

07 Maintenance and specifications
Replacing bulbs
07
264
Front fog lights
G021753
1.
Remove the cover by pressing in the clips
and pulling straight out.
2.
Unscrew the fog light housing screw and
pull it out.
3.
Turn the bulb counterclockwise and
remove it.
4.
Install a new bulb by turning clockwise.
5.
Press the bulb into the holder. (The profile
of the bulb holder corresponds to the pro-
file of the foot of the bulb.)
6.
Reinstall the bulb holder. The
TOP
mark on
the bulb holder must always be upward.
7.
Put the cover back into place.
Taillight housing
G021754
The bulbs in the taillight cluster are replaced
from inside the trunk (not the LED functions).
NOTE
Before starting to replace a bulb, see
page 260.
1.
Remove the covers in the left/right panel to
access the bulbs. The bulbs are located in
separate bulb holders.
2.
Press the catches together and pull out the
bulb holder.
3.
Remove the defective bulb by pressing it in
slightly and turning it before pulling it out.
4.
Plug in the connector.
5.
Press the bulb holder until it clicks into
place and reinstall the cover.
License plate lighting
G021756