2010 Volvo V70 Owner's Manual - Page 157
2010 Volvo V70 Manual
Page 157 highlights
04 Comfort and driving pleasure Cruise control Operation > The symbol illuminates and the text (---) mph (5) indicates that cruise control is in standby mode. NOTE • NOTE This does not set the vehicle's speed. Setting a speed G022910 A temporary increase in speed by pressing the accelerator pedal, for less than 1 minute (e.g. when passing another car), does not affect the current cruise control setting. The vehicle will automatically return to the previously set speed when the accelerator pedal is released. If one of the cruise control buttons is kept depressed for more than approx. 1 minute cruise control is disengaged. The engine must then be switched off in order to reset cruise control. 04 Use the or buttons set the vehicle's current speed. The set speed is shown in the display. • Steering wheel-mounted controls and display NOTE Cruise control cannot be engaged at speeds below 20 mph (30 km/h). Standby mode Resume set speed Deactivating Activate/set speed Set speed indicator (parentheses indicate standby mode) Automatic deactivation Cruise control is automatically deactivated temporarily if one of the following occurs: Adjusting the set speed After a speed has been set, it can be increased or decreased by using the or buttons. 1. Press and hold down or until the vehicle reaches the desired speed. > This will become the set speed when the button is released. 2. Press or for approximately a half second and release the button to increase or decrease vehicle speed by approximately 1 mph (1.6 km/h). • If the speed drops below approximately 20 mph (30 km/h). Engaging the cruise control function Before a speed can be set, the cruise control system must be engaged (put in standby mode). ± Press the CRUISE button (1). When the brake pedal is depressed. If the gear selector is moved to position N. During wheel spin or wheel lock-up. If the vehicle's speed is increased by using the accelerator pedal for more than 1 minute. The currently set speed will be saved in the system's memory. `` 157