2010 Volvo V50 Owner's Manual - Page 229

09 Maintenance and servicing Replacing bulbs 6. Insert a new bulb by turning it clockwise (the profile on the bulb holder will correspond with the profile in the base of the bulb). 7. Reinsert the bulb holder. The mark TOP should be upward. 2. Remove the covers (A or B) in the left/right panels to access the bulb holders. 3. Disconnect the wiring connector from the affected bulb holder. 4. Press the catches together and pull out the bulb holder. 5. Replace the defective bulb. 6. Press the wiring connector back into position. 7. Press the bulb holder into place and reinstall the cover. 09 Location of taillight bulbs Removing the taillight bulb holder G019166 Location of taillight bulbs All bulbs in the taillight cluster can be replaced from the cargo area. To access the bulb holders: 1. Switch off all lights and turn the key to position 0. Brake light (LED)1 Taillight Parking light Turn signal 1 The wiring to the LED brake lights is permanently connected to the bulb holder. It should not be removed. G018058 `` 229