2009 Volvo XC70 Owner's Manual - Page 80

03 Your driving environment Seats Operation The seats can be adjusted for a short period after unlocking the door with the remote control without the key in the ignition slot. Seat adjustment is normally made when the ignition is on and can always be made when the engine is running. Seat with memory function (option) 1. Move the seat (and door mirrors) to the desired position using the seat and mirror adjustment controls. 2. Press and hold down the M (memory) button. 3. With the memory button depressed, press button 1 briefly to store the current position for the seat/mirrors. To move the seat and mirrors to the position that they were in when a button was programmed: Press and hold down button 1 until the seat and mirrors stop moving. 03 NOTE • • The power seats have an overload protector that activates if a seat is blocked by any object. If this occurs, switch off the ignition (key in position 0) and wait for a short period before operating the seat again. Stored seat position Stored seat position G021134 Only one of the power seat's controls can be used at the same time. NOTE Stored seat position Memory button As a safety precaution, the seat will stop automatically if the button is released before the seat has reached the preset position. Programming the memory Three different seating and door mirror positions can be stored in the driver seat's memory. The following example explains how button 1 can be programmed. Buttons 2 and 3 can be programmed in the same way. To program (store) a seat position and door mirror position in button 1: Remote keyless entry system and the driver's seat The remote control transmitter also controls the position of the power driver's seat in the following way: 1. Adjust the seat to your preferences. 2. When you leave your vehicle, lock it using the remote control. 80