2009 Volvo C70 Owner's Manual - Page 94
2009 Volvo C70 Manual
Page 94 highlights
04 Interior Front seats NOTE The power seats have an overload protector that activates if a seat is blocked by any object. If this occurs, switch off the ignition (key in position 0) and wait for approximately 20 seconds before operating the seat again. Three different seating positions (and the position of the door mirrors) can be stored in the seat's memory. The memory buttons are located on the outboard side of the driver's seat (see the illustration). To program (store) a seat/mirror position in memory button 1: 1. Adjust the seat (and door mirrors) to the desired position. 2. Press and hold down the "M" (Memory) button. 3. With the "M" button depressed, press memory button 1 to store the seat and mirrors' current position. To move the seat and mirrors to the position that they were in when memory button 1 was programmed, press and hold down button 1 until the seat/mirrors stop moving. As a safety precaution, the seat will stop automatically if the button is released before the seat has reached the preset position. 1. Adjust the seat/door mirrors to the desired position. 2. When you leave the car, lock it using the remote control. 3. The next time the driver's door is unlocked with the same remote control and that door is opened within 2 minutes, the driver's seat and door mirrors will automatically move to the position that they were in when the doors were most recently locked with the same remote control. Emergency stop 04 If the seat inadvertently begins to move, press any of the buttons to stop the seat. Programming the seat memory, driver's seat only (option) NOTE The memory function in the remote control operates independently the memory function in the seat. Central locking system remote control and driver's seat memory The remote control transmitter can also be equipped with an optional function that controls the electrically operated driver's seat in the following way: Power seat memory buttons 94