2001 Volvo C70 Owner's Manual - Page 45

2001 Volvo C70 Manual

Get 2001 Volvo C70 PDF manuals and user guides View all 2001 Volvo C70 manuals

Page 45 highlights

5. Reinsert the bulb and connector into the headlight housing. The guide lug must be up to ensure proper positioning. 6. Press the retaining clamp back into position. 7. Reinstall the plastic cover. The marking "Top" on the cover should be up when the cover is reinstalled. CAUTION! Do not touch the glass on halogen bulbs with your fingers. Grease, oil, or any other impurities can be carbonized onto the bulb and cause damage to the reflector. Be sure to use bulbs of the correct tupe and voltage. High beam headlight bulb (B) replacement 1. Pull the catch on the lower edge of the cover upward and remove the plastic cover. 2. Press the wire catches on the retaining clamp (1 in inset illustration above) together and push out (2) to release the bulb and connector from the headlight housing. 3. Pull the bulb out of the connector. 4. Insert a new bulb into the connector. 5. Reinsert the bulb and connector into the headlight housing. The guide lug must be up to ensure proper positioning. 6. Press the retaining clamp back into position. 7. Reinstall the plastic cover. Catch B should snap into position. Contents | Top of Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
5. Reinsert the bulb and connector into the headlight housing. The guide lug must be
up
to ensure proper positioning.
6. Press the retaining clamp back into position.
7. Reinstall the plastic cover. The marking "Top" on the cover should be up when the cover is reinstalled.
CAUTION!
Do not touch the glass on halogen bulbs with your fingers. Grease, oil, or any other impurities can be carbonized onto
the bulb and cause damage to the reflector.
Be sure to use bulbs of the correct tupe and voltage.
High beam headlight bulb (B) replacement
1. Pull the catch on the lower edge of the cover upward and remove the plastic cover.
2. Press the wire catches on the retaining clamp (1 in inset illustration above) together and push out (2) to release the
bulb and connector from the headlight housing.
3. Pull the bulb out of the connector.
4. Insert a new bulb into the connector.
5. Reinsert the bulb and connector into the headlight housing. The guide lug must be
up
to ensure proper positioning.
6. Press the retaining clamp back into position.
7. Reinstall the plastic cover. Catch B should snap into position.
Contents
|
Top of Page