2015 Polaris Sportsman Touring 570 SP Owners Manual - Page 112
2015 Polaris Sportsman Touring 570 SP Manual
Page 112 highlights
MAINTENANCE Lights Poor lighting can result in reduced visibility when driving. Headlight and taillight lenses become dirty during normal operation. Clean lights frequently and replace burned out lamps promptly. Always make sure lights are adjusted properly for best visibility. Headlight Lamp Replacement When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. If fingers do touch a lamp, clean it with denatured alcohol. 1. 570 SP: Remove the seven (7) headlight pod screws. Pull the pod cover forward. 570/570 EPS: Remove the two screws on the lower front corners of the headlight pod. Remove the screw from the rear of the pod. Lift the pod slightly while depressing the tabs at the rear of the pod. Lift the pod cover and disconnect the speedometer harnesses from the speedometer. CAUTION! Hot components can cause burns to skin. Allow lamps to cool before servicing. 2. Unplug the headlamp from the wiring harness. Be sure to pull on the connector, not on the wiring. 3. Turn the lamp counter-clockwise to remove it. 4. Apply dielectric grease to the socket and install the new lamp. Make sure the tab on the lamp locates properly in the housing. 5. Reassemble the pod. 110