2015 Polaris Ranger Crew 900 Owners Manual - Page 86
2015 Polaris Ranger Crew 900 Manual
Page 86 highlights
MAINTENANCE Tires Wheel Removal 1. 2. 3. 4. 5. Position the vehicle on a level surface. Place the transmission in PARK. Stop the engine. Loosen the wheel nuts slightly. Elevate the side of the vehicle by placing a suitable stand under the frame. Remove the wheel nuts and washers. Remove the wheel. Wheel Installation 1. Place the transmission in PARK. 2. Place the wheel in the correct position on the wheel hub. Be sure the valve stem is toward the outside and rotation arrows on the tire point toward forward rotation. WARNING! Improperly installed wheels can adversely affect tire wear and vehicle handling, which can result in serious injury or death. Always ensure that all nuts are torqued to specification. Do not service axle nuts that have a cotter pin installed. See your POLARIS dealer. 3. Attach the wheel nuts and washers and finger tighten. 4. Carefully lower the vehicle to the ground. 5. Torque the wheel nuts to specification. See page 83. Power Steering Unit If your model is equipped with power steering, frequently clean the areas around and on the power steering unit to allow proper cooling. Clean these areas thoroughly. Clean Often 84