2015 Polaris 550 Indy Owners Manual - Page 44
2015 Polaris 550 Indy Manual
Page 44 highlights
THE PERFECT FIT Handlebar Adjustments Handlebar Angle 1. Loosen the four bolts on the Loosen bolts to adjust handlebar angle top of the adjuster block. If necessary, pry the blocks apart with a screwdriver. 2. Adjust the handlebar forward or rearward to the desired angle. 3. Be sure the handlebar, brake lever and throttle lever operate smoothly and do not hit the gas tank, windshield or any other part of the machine when turned fully to the left or right. If necessary, loosen the set screws for the left and right controls, rotate the controls slightly, then tighten the set screws to the proper torque. NOTICE: Do not stretch wires while adjusting the controls. Stretching the wires could damage the handwarmers. • Right control torque: 35 in. lbs. (4 Nm) +/- 10%. • Left control torque: 24 in. lbs. (2.7 Nm) +/- 10%. 4. Tighten the bolts. 42