2014 Polaris WideTrak LX Owners Manual - Page 87

2014 Polaris WideTrak LX Manual

Get 2014 Polaris WideTrak LX PDF manuals and user guides View all 2014 Polaris WideTrak LX manuals

Page 87 highlights

MAINTENANCE Clutch System Drive Belt Deflection Measure belt deflection with both clutches at rest and in their full neutral position. Place a straight edge on the belt (1) and apply downward pressure while measuring at point 2. This measurement should be 1 1/4 inches (32 mm). 2 1 Drive Belt Adjustment Belt deflection should be adjusted without removing the clutch from the jackshaft. 1. Loosen the 7/16-inch jam nut on the belt width adjuster. 2. Using a 1/8-inch Allen wrench, adjust the threaded set screw as needed. Tip: Turn the set screw in (clockwise) to increase the distance between the sheaves and out (counterclockwise) to decrease the distance. 3. Tighten the jam nut. Torque Stop Periodically check torque stop clearance. With clutches in proper alignment, the torque stop clearance should be. 010-.030 inch (.25-.75 mm) from the engine case. Adjust if necessary, and lock the jam nut. .010-.030 in. (.25-.75 mm) 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
85
MAINTENANCE
Clutch System
Drive Belt Deflection
Measure belt deflection with
both clutches at rest and in their
full neutral position.
Place a straight edge on the belt
(1) and apply downward
pressure while measuring at
point 2. This measurement
should be 1 1/4 inches (32 mm).
Drive Belt Adjustment
Belt deflection should be adjusted without removing the clutch from the
jackshaft.
1.
Loosen the 7/16-inch jam nut on the belt width adjuster.
2.
Using a 1/8-inch Allen wrench, adjust the threaded set screw as
needed.
Tip:
Turn the set screw in (clockwise) to increase the distance between the
sheaves and out (counterclockwise) to decrease the distance.
3.
Tighten the jam nut.
Torque Stop
Periodically check torque stop
clearance. With clutches in
proper alignment, the torque stop
clearance should be. 010-.030
inch (.25-.75 mm) from the
engine case.
Adjust if necessary, and lock the
jam nut.
1
2
.010-.030 in.
(.25-.75 mm)