2013 Polaris Ranger Crew 800 Owners Manual - Page 24
2013 Polaris Ranger Crew 800 Manual
Page 24 highlights
FEATURES AND CONTROLS Park Brake Lever To help prevent the vehicle from rolling, engage the park brake when parking the vehicle. When the park brake is fully engaged, "BRAKE" appears in the rider information display. Engine speed is limited to 1300 RPM in all gears, except neutral. If throttle is applied, this limiting feature prevents operation, which protects the park brake pads from excessive wear. E Trip 1 km F RPM mi 88:88 Tip: This feature will not operate properly if the park brake connector or switch (under the hood) malfunctions or becomes disconnected, or if the switch has moved. Check for disconnection, then see your dealer promptly if this feature fails to operate properly. Inspect and adjust park brake cable tension after the first 25 hours of operation and every 100 hours thereafter to ensure proper cable tension. See page 64. Always apply the service brakes before engaging or releasing the park brake. 1. Apply the brakes. 2. Pull the park brake lever downward as far as possible. 3. To release the park brake, apply the brakes. Press the park brake release inward and move the lever upward as far as possible. WARNING! Operating the vehicle while the park brake is engaged could cause loss of control and result in serious injury or death. Always disengage the park brake before operating the vehicle. 20