2013 Polaris 600 Indy SP Owners Manual - Page 43
2013 Polaris 600 Indy SP Manual
Page 43 highlights
FEATURES Instrument Cluster Rider Information Center Security System (Ignition Lock System) Locking the System With Your Personal Security Code 1. Start the engine and lock the parking brake. 2. Press and hold the MODE and SET buttons for 3 seconds, then release. SECURE OFF should be displayed. If not, repeat this step. 3. Wait until ENTER displays, then press and release SET to advance the digit. When the first digit of your security code is displayed, press and release MODE to accept the digit. TIP: If the ENTER screen exits due to inactivity, repeat step 2. 4. Continue to use SET and MODE to select and accept the remaining two digits of the code. 5. After accepting the third digit, view the display screen. SECURE ON displays if the system locks. Engine speed is now limited and the snowmobile cannot be driven. TIP: When the engine is running, the display will alternate between SECURE ON and ENTER. 6. If BAD CODE displays, the screen will then return to the ENTER screen. Repeat steps 3-5 to re-enter the security code. 39