2012 Polaris Ranger 800 HD Owners Manual - Page 22
2012 Polaris Ranger 800 HD Manual
Page 22 highlights
FEATURES AND CONTROLS Switches Ignition Switch The ignition switch is a three-position, key-operated switch. The key can be removed from the switch when it is in the OFF position. OFF ON START The engine is off. Electrical circuits are off, except Acc, 12V. Electrical circuits are on. Electrical equipment can be used. Turn the key to the START position to engage the electric starter. The key returns to the ON position when released. AWD/Differential Switch Ignition Switch Light Switch Mode Button Mode Button The MODE button is located on the instrument cluster. Use the MODE button to toggle through mode options available in the instrument cluster. See pages 24-28. Light Switch The ignition switch key must be in the ON/RUN position to operate the headlights. Press the top of the rocker switch toward the dash to place the headlights on high beam. Move the rocker switch to the center position to place the headlights on low beam. Press the bottom of the rocker switch to turn off the headlights. HIGH LOW OFF AWD/Differential Lock Switch The AWD/Differential Switch has three positions: • All Wheel Drive (AWD) AWD • Differential Lock (2WD) • Differential Unlock Differential Lock Press the top of the rocker switch to engage All Wheel Drive (AWD). See page 40 for operating Differential Unlock instructions. Move the rocker switch to the center position to lock the differential and operate in rear wheel drive. Press the bottom of the switch to unlock the differential and allow the two rear drive wheels to operate independently. See page 41 for differential lock operating instructions. 18