2011 Polaris RZR 4 Owners Manual - Page 83
2011 Polaris RZR 4 Manual
Page 83 highlights
MAINTENANCE Engine Oil Oil and Filter Change 8. Using a cap-style oil filter wrench, turn the filter counter-clockwise to remove it. 9. Using a clean dry cloth, clean the filter sealing surface on the crankcase. 10. Lubricate the o-ring on the new filter with a film of fresh engine oil. Check to make sure the o-ring is in good condition. 11. Install the new filter and turn by hand until the filter gasket contacts the sealing surface, then turn and additional 1/2 turn. 12. Remove the dipstick and fill the sump with two quarts (1.9 l) of recommended oil. 13. Place the transmission in PARK. Apply the brakes. 14. Start the engine. Allow it to idle for one to two minutes. 15. Stop the engine. Inspect for leaks. 16. Re-check the oil level on the dipstick and add oil as necessary to bring the level to the upper mark on the dipstick. 17. Dispose of used filter and oil properly. 79