2009 Polaris IQ Shift 136 Owners Manual - Page 112
2009 Polaris IQ Shift 136 Manual
Page 112 highlights
Track Maintenance Track Tension MAINTENANCE 5. Check for specified slack between the wear surface of the track clip and the plastic slider. Refer to the Track Tension Data Chart on page 108. If the track needs adjustment: 6. Loosen the rear idler shaft bolt. 7. Loosen the locknuts. Adjusting Screw Slack Measurement Lock Nut Track S 16I(40 cm) 10 lbs. (4.54 kg) Shaft Bolt 8. Tighten or loosen the track adjusting screws to provide equal adjustment on both sides of the track. 9. Repeat the measurement on the other side of the track. TIP: Check more frequently when the machine is new. 10. Start the machine and slowly rotate the track at least five revolutions. Let the track come to a stop (do not apply brakes). 11. Check track alignment (see page 110) and adjust as necessary. 12. Tighten the locknuts. 13. Tighten the idler shaft bolts. 14. (n) Torque idler shaft bolts to 35 ft. lbs. (47.5 Nm). 109