1999 Nissan Quest Owner's Manual - Page 52

FRONT FACING INSTALLATION AT SECOND AND THIRD ROW OUTBOARD POSITIONS The following instructions apply to second row bucket seats, the second row bench seat and the outboard positions of the threepassenger bench seat. WARNING When installing a child restraint in the two-passenger bench seat, if it is placed in the seating position next to the passenger side sliding door, be sure both the auxiliary buckle and main buckle are properly fastened. Failure to do so could increase the chance and/or severity of injury in an accident. ARS1174 ARS1175 3. Remove all slack in the lap belt for a very tight fit by pulling forcefully on the lap belt adjustment. 4. Before placing the child in the child restraint, use force to tilt the child restraint from side to side, and tug it forward to make sure it is securely in place. 5. If it is not secure, try to tighten the belt again, or put the restraint in another seat. 6. Check to make sure the child restraint is properly secured prior to each use. Seats, restraints and supplemental air bag systems 1-45